How to make a bunny pom-pom necklace

These cute little necklaces are the perfect craft for Easter weekend. Plus, you can use up some of your yarn and felt scraps in the process.

bunny pom pom necklaces

What you’ll need:

  • 1 medium sized pom-pom (if you need a refresher how to make a pom-pom with your Loome tool, check out our post: How to make a pom-pom)

  • Cord for the necklace (thick string, nylon cord, anything goes)

  • Felt scraps

  • Fabric glue or glue gun

  • Scissors

  • Darning needle

  • A few bristles from a clean broom

bunny pompom materials needed

1. Make your pom

These bunny necklaces start with a pom-pom. You can either make your pom-pom a very bunny-like colour like white, grey or brown, but multi-coloured pom-poms work just as well, just take a look at this one that a little girl made at a festival craft workshop I ran last summer! Serious heart eyes.

Screenshot 2019-03-26 at 11.53.39.png
bunny pom pom necklace how to

2. Cut out the bunny’s features from felt

Use any small scraps of felt to cut ears, inner ear pieces, a nose and eyes.

3. Attach the necklace cord

Thread your necklace cord onto a blunt darning needle. Separate the strands of the pom-pom to find the middle string. Run the darning needle under this string and out the other side. Tie the two ends into a knot to secure them.

IMG_5684.JPG
how to attach cord for a pom pom necklace

4. Attach the felt pieces

Now that you know which way is us on your pom-pom, it’s time to attach the ears, eyes, nose and whiskers. Start with the ears. Glue guns work great for this kind of thing because the glue sets really quickly. If you’re using fabric glue, you’ll need to prop up your pom-pom to dry over-night, or at least a couple of hours.

Start with the ears, separate the strands of the pom-pom near the necklace cord and put a bit of glue at the bottom of the ear. Tuck it into the gap so it sits nice and close to the middle of the pom-pom.

Do the same with the eyes, nestling them slightly into the pom-pom. You can always trim the pom-pom a big shorter around the eyes if they get hidden by the yarn.

For the nose, glue a few bristles from your dustpan and brush to the back of the nose. I used about 5 and cut them in the middle so that they splayed out nicely on each side. Then add a bit more glue and attach it to your pom-pom.

That’s it, you now have the most adorable little bunny pom-pom ever! These techniques are exactly the same for all sorts of different animals. Which ones will you make?

pom+pom+animals

Loved this tutorial?

Would you like more pom-pom project inspiration?

Sign up to my monthly newsletter to get project ideas, craft tips and ideas on what to make next with your Loome tool.

How To Make A Kumihimo Cord

I love, love, love these cords and how simple they are to make. It’s my go-to craft when I’m hopping on the Overground to a workshop or party, or know that I have to commute into the city to get materials. These are also great little cords to use up random yarn scraps… so no waste here!

Here’s a quick little tutorial how to make your own kumihimo cords with a Loome Pom-Pom Trim Guide.

kumihimo cord with Loome tool
crafting on the go with the loome

What you’ll need:

  • Yarn scraps: 7 strands that are at least 45cm long

  • Loome Pom-Pom Trim Guide

  • Scissors (only for trimming the ends when you’re done)

Let’s get making!

First, gather all the strands together and tie a knot in the end, leaving a bit of a tail so that you can tie it onto something later.

tying-knots-for-kumihimo.jpg
setting-up-yarn-for-kumihimo.jpg

Thread the knot through the hole and separate the strands so that each strand goes into a notch. There should be one empty notch and the knot should sit just inside the hole with the tail hanging out the other end. Hold the Trim Guide so that the empty notch is facing you.

kumihimo-cord-how-to.jpg
kumihimo-cord-pulling-down.jpg

Count to the left: 1, 2, 3. Take that third strand and pull it down into the empty notch.

Rotate the trim guide so that it’s facing you again.

Count to the left again: 1, 2, 3. Take that third strand and pull it down into the empty notch. Continue in this way, rotating the Trim Guide so that it’s facing you and gently pulling your cord through the back every so often. It doesn’t take long to make a kumihimo cord, one of the prettiest and simplest Japanese crafts. If you’d like the stop, I just twist all my strands together and pop the whole bundle into a little pouch and put it in my pocket or bag, so I can pull it out anytime I like to craft on the go.

kumihimo-cord-with-loome-tool.jpg
kumihimo-cords-with-loome-trim-guide.jpg

Use your cords as necklaces, friendship bracelets, decorations on gifts… anything really!

You can use any type of fibre to create these cords as well; so experiment! Raffia, thin t-shirt yarn, ribbon, cord, embroidery floss… the possibilities are endless. What kind of cord will you make?


If you want to see the cord-making in action,

check out this video by Loome:

LOVE YA Papercut Card Template for Valentine's Day

Whether you’re in the “Valentines Schmalentines” camp or you’re already dresses in red and pink from head to toe in anticipation for Feb the 14th, it’s nice to get a card that says, LOVE YA. Because we all like to know why we’re loved and it’s even better to tell someone else why they’re the sparkle of your eye.

Here’s a simple paper-cut card template that you can use to make a handmade card (because if we’re really going to go all-out this Valentine’s Day, you might as well make the card by hand!). Paper cutting is fairly easy with the right tools and you don’t need to be particularly artistic or creative to get beautiful results, which is why my paper cut workshops and parties in London are so popular!

handmade-papercut-valentines.jpg

What you’ll need:

papercut-valentines-day-card.jpg

TRACE

Print the template page at 100% on your home printer. Don’t scale or fit to the page.

 Cut around the dotted line. When printed at 100%, this square should measure 13.5cm x 13.5cm and fit a standard square greeting card.

Open your card and lay it down in front on you. On the left-hand side of the inside of the card, place your sheet of graphite paper face down and then lay your template on top of this. 

Trace along the lines of the template until the whole design has been transferred onto your card. If you need to peek to see if you’ve traced it all, just pinch one corner, making sure you have all the layers secure, and lift up the graphite paper.

papercut-valentines-day-card-blank.jpg
template-traced-onto-card.jpg
tracing-template-for-papercut-cards.jpg
cutting-out-template.jpg

CUT

Get your scalpel and start cutting! It’s important to always cut towards your body when paper-cutting. Using a fresh, sharp blade is also important in order to get clean cuts. Rotate the card as you work around the design. Remember to cut along all the lines.

GLUE

Choose the backing paper and cut it to size once all the pieces of the design have been cut out. Carefully use a glue stick to apply glue around the edge of the card and along the chunkier parts of the design. You don’t want to get glue on the front of the card, so I usually just do a few dabs here and there in the middle so that the backing paper sticks down.

papercut-valentines-day-card-all-done.jpg
glueing-the-card.jpg

Place your card underneath a few heavy books until dry.

TA-DA! That’s it. Write a mushy note inside for your #1 and tell then why you love them!

Simple Christmas Bauble Gift Tags

Christmas is one of the busiest times of the year for me, with the shop and workshops, on top of trying to make it a special time of the year for my two little children. So, finding simple ideas that make a gift POP that don’t take any effort (shh don’t tell!), like this one, are right up my alley.

simple christmas handmade gift tags

These handmade Christmas gift tags are a really simple way to dress up a gift. Here’s a quick tutorial how to make them.

You’ll need:

  • blank gift tags (or make your own with sturdy card that’s 11 x 5.5cm and a hole punch)

  • glue stick

  • scraps of decorative paper

  • black pen

  • scissors

I used the circle die for my Sizzix Big Shot machine to cut out the circles but you do not have to have one of these to make these tags. Use a compass, or any small round object and trace around. My circles are 4cm in diameter.

  1. First draw the top of the bauble and the line down the centre of the tag.

  2. Glue your circle and place it on the tag so it slightly overlaps the black lines.

  3. Attach some ribbon or baker’s twine to the top of the tag and write a personal message on the other side.

christmas gift tag diy

How To Make A Pom-Pom Bat

Halloween is coming! I walked through the seasonal aisle at my local Sainsbury’s this afternoon. It was half ghoulish costumes for 4-foot zombies, witches, skeletons and monsters and half collectible Christmas shortbread tins. If you’d rather forego the plastic decorations for Halloween this year, I’ll show you how to create fun little bat pom-poms, which you can hang up in doorways, on your doorknobs and in the windows to greet your trick-or-treaters.

pom pom bat

What you’ll need:

  • Loome tool

  • Black yarn, any weight

  • Felt scraps in black and white

  • String for hanging

  • PVA glue or fabric glue

Make a pom-pom with your Loome tool

Use your black yarn to create a pom-pom with your Loome tool. If you’re using DK-weight yarn, you’ll need to wrap it around 140 times. If you’re using Aran-weight yarn, around 90 revolutions will do the trick. If you need more in-depth instructions on making a pom-pom with a Loome tool, just check out our previous post, How To Make A Pom-Pom.

Trim your pom.

How to make a pom pom bat
how to make a pom pom bat

Cut out the eyes and wings

Use your felt scraps to cut out two white circles, and two smaller black ones to go inside. Go ahead and glue those black circles down, before they get lost! Cut a small smiley mouth for your bat, but a row of jagged teeth also look great!

Cut two bat-shaped wings next, and you’re all done with the tricky cutting bits.

String it up

Before you glue on the bat’s face and wings, attach the string you’re going to use to hang it up. This way, you’ll know which way is up for your bat.

tie the string onto your pom pom bat to hang it up

Glue it all together

Using a hot glue gun or fabric glue, attach the eyes, teeth and wings onto your pom-pom. Separate the yarn a bit to nestle the pieces into your pom-pom, so that they’re nice and secure.

Ready, set, SPOOK!

Give it a moment to dry. This is really quick is you’ve used a glue gun. If you’ve used another kind of glue then you might want to wait a bit longer for it to dry. Hang up your bat and get ready to spook away all those ghosts and ghouls on Halloween night with your crew of pom-pom bats.

pom pom bat how to
pom pom bat with pumpkins